12
Using Vehicle Battery Power
To power the Micro-35 from your vehicle’s
battery, you need a DC adapter (not sup-
plied), such as Cat. No. 273-1801.
Cautions:
• You must use a DC adapter that sup-
plies 3 volts DC power and delivers at
least 200 milliamps. The center tip of
its barrel plug must be set to positive,
and the plug must properly fit the
Micro-35’s
DC3V
jack. The recom-
mended DC adapter meets these
specifications. Using a DC adapter
that does not meet these specifica-
tions could damage the Micro-35 or
the DC adapter.
• Always plug the DC adapter into the
Micro-35 before you plug it into the
cigarette-lighter socket, and unplug
the adapter from the cigarette-lighter
socket before you unplug it from the
Micro-35.
14-1162.fm Page 12 Thursday, July 1, 1999 3:41 PM
To Next Page
Loading...
