EasyManua.ls Logo

Optimus Micro-35 - Cleaning the Tape-Handling Parts

Optimus Micro-35
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
Use only fresh batteries of the
required size and type. Always
remove old or weak batteries. They
can leak chemicals that can destroy
electronic circuits.
Modifying or tampering with the recorder’s
internal components can cause a malfunc-
tion and might invalidate the recorder’s
warranty. If your recorder is not operating
as it should, take it to your local Ra-
dioShack store for assistance.
CLEANING THE
TAPE-HANDLING PARTS
Dirt, dust, or particles of the tape’s coating
can accumulate on the tape heads and
other parts that the tape touches. This can
greatly reduce the performance of the re-
corder. Use the following cleaning proce-
dure after every 20 hours of recorder
operation.
1. Press
STOP/EJECT
, remove the batter-
ies, and disconnect any other power
source.
14-1162.fm Page 30 Thursday, July 1, 1999 3:41 PM

Related product manuals