1
Basic Operation
Dubbing a Cassette Tape
You can copy, or dub, a cassette tape from one cassette deck to another.
You can use either deck as the playback or recording deck. However, if you
want to monitor the cassette deck during dubbing, use the deck connected to
the
TAPE 1/VCR
jacks as the source, and the deck you connected to the
TAPE 2
MONITOR
jacks as the recording deck. Then press
TAPE 2 MONITOR
until
TAPE
2
appears on the display. See “Using the TAPE 2 MONITOR Button” on the pre
vious page.
To Next Page
Loading...
