OptiPure BWS350 - Tank and Repressurization Assembly Components; Storage Tank and Inlet Components; Repressurization Pump and Controls; Tank Level Float Switches

BWS350 System Installation, Operation & Maintenance 13
Tank/RP Components
Tank Bracket -
For 16G Storage Tank -
PN: 594-80516
For 50G Storage Tank -
PN: 594-80510
50 Gallon Storage Tank Shown.
16 Gal Storage Tank -
PN: 570-00016
50 Gal Storage Tank -
PN: 570-00056
(50 Gal Tank shown.)
Tank Inlet Divert Valve -
PN: 520-12225
In normal operation, handle should be
down (horizontal). For measuring water
production or purging air from system,
turn Divert Valve handle up.
Float Valve -
(inside tank
beneath inlet)
PN: 520-01203
Air Breather -
PN: 300-40005
High Level Float Switch -
(inside tank)
PN: 740-01120
Controls Processor. When
tank is full, oat switch is in up
positon and switch inside oat
is open, causing Processor to
shut off.
RP Pump -
PN: 704-35513
Buffer Tank Valve -
PN: 520-14501
Optimized Water Inlet -
Connect line from Optimized
Water Outlet
RP Assy
Outlet -
1/2” Hose Barb
Insert,
PN: 550-08730
Connect to
equipment inlet.
Bypass
Check Valve-
PN: 524-01030
Foot Valve -
(inside tank, at
base of pump
suction tube)
PN: 520-10221
Low Level
Float Switch -
(inside tank)
PN: 740-01116
Low Level
Control Relay -
(in Control Box)
PN: 740-01290
Buffer Tank -
For 16G Storage Tank - PN: 340-50001
For 50G Storage Tank - PN: 340-50004