Optium Xceed User Manual

Calibrating
Your Monitor
Note: If the LOT number or
calibration CODE that shows
on your monitor’s display
window is not correct:
What It Means:
Your monitor may not be
calibrated for the box of
electrodes you are using.
What To Do:
•Re-calibrate your monitor.
•Check that you are using
the calibrator that came in
the box of electrodes you
are using.
Remember, improper
calibration will cause
incorrect results.
3
Press and Hold the
button to turn your
monitor off.
29
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 32

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries