Optium Xceed User Manual

How to Recall the
LOT Number or
Calibration CODE
1
To recall the glucose LOT
number, Press and Hold the
button. While holding the
button, Press and Hold
the button.
The Display Check shows on
the display window, then the
glucose LOT number shows
with the time, month, and
day of the most r
ecent
glucose calibration.
2
After the glucose LOT
number is displayed, you
can recall the ß-Ketone
calibration CODE. Press and
Release the button or
the button.
The ß-Ketone calibration CODE
shows with the time, month,
and day of the most recent
ß-Ketone calibration.
▼
Calibrating
Your Monitor
28
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 31

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries