Optium Xceed User Manual

36
2
Continue to touch the blood
drop to the end of the
electrode until the monitor
begins the test. The monitor
begins the test when:
•You hear the beeper, if the
beeper is ON.
•The display window shows
the status bar.
•Then the display window
shows the countdown.
Note: Do not remove the
electrode from the monitor
or disturb it during
the countdown.
Status bar
Countdown
Monitoring
Blood Glucose
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 39

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries