2
Wash your hands using
warm soapy water and dry
them completely.
3
Remove the electrode from
its foil packet.
4
Insert the thr
ee black lines
at the end of the electrode
into the electrode port.
5
Push the electrode in until
it stops.
The monitor turns on
automatically.
These items show on the display
window, one after the other:
•Display Check – Remember to
make sure that all items in the
picture here show on the
display window. (See Chapter
1 for more information about
the Display Check.)
Monitoring
Blood ß-Ketone
46
To Next Page
Loading...