Optium Xceed User Manual

solutions, read the control
solution instructions for use.
•MediSense Control
Solutions may be used for
glucose or ketone control
solution testing.
•
Do not use the control
solution if the expiration date
has passed. Check the
expiration date printed on the
control solution bottle.
•When you open a control
solution bottle for the first
time, count forward 90 days
and write this date on the
control solution bottle using
a pen that won’t smear or
wipe off. Throw away any
remaining solution after
this date.
•The results obtained from
control testing do not reflect
your personal blood glucose
or blood ß-Ketone levels in
any way.
•
Do not swallow the
control solution.
•
Do not inject the control
solution or use the control
solution as eye drops.
Control
Solution Testing
56
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 59

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries