Optium Xceed User Manual

Specifications
& Limitations
Storage
Temperature
Monitor: –25º to 55ºC
Electrodes: See electrode instructions
for use.
Control Solution: See control solution instructions
for use.
Blood Glucose See blood glucose electrode
Assay Range instructions for use.
Blood ß-Ketone See blood ß-Ketone electrode
Assay Range instructions for use.
Control Solution See blood glucose or blood
Range ß-Ketone electrode instructions
for use.
Functions - Blood glucose monitoring
- Blood ß-Ketone monitoring
- Memory
- Glucose averaging: 7-Day,
14-Day, and 30-Day Averages
- Control solution marking
and testing
- Backlight: If ON – Stays ON
during countdown; turns OFF
30 seconds after result is
displayed. If OFF – Stays OFF
during countdown; stays OFF
during data upload.
- Beeper: If ON – Beeps when
calibrator is fully inserted
and when countdown starts
and finishes.
78
133-221 Manual,G3b,Aus 3/17/05 11:15 AM Page 81

Optium Xceed Specifications

General

Sample Size	0.6 microliters
Test Time	5 seconds
Battery Life	Approximately 1000 tests
Blood Sample	Capillary whole blood
Memory Capacity	450 results
Operating Temperature	10°C to 40°C
Operating Humidity	10% to 90% RH
Power Source	2 x AAA batteries