Optoma DC300 - Page 7

7
10. Rotate: Rotate image
11. Sharp+/-: Image sharpness control
12. Computer: Computer mode
13. SXGA/XGA: Switch the output signal between XGA and SXGA
14. Mirror: Output right-and-left, up-and-down mirror image
15. Page +/-: Saved image page up and down when image recall mode is enabled
16. Zoom+/-: Image zoom in and zoom out control
17. Bright+/-: Image brightness control
18. Focus+/-: Adjust focus manually
19. Red+/-: Image chroma control (red)
20. Blue+/-: Image chroma control (blue)