To Next PageTo Next PageHow to fix 'Error (Over Temp)' on Optoma EW330?
If your Optoma Projector displays an 'Error (Over Temp)' message, it indicates that the projector is overheating. To resolve this, reduce the ambient temperature around the projector and ensure it has proper ventilation.
What to do if Optoma EW330 Projector shows 'Error (Lamp Fail)'?
If your Optoma Projector shows an 'Error (Lamp Fail)' message, it means there may be an issue with the lamp. Inspect the lamp and replace it if it is faulty.
What to do if Optoma EW330 says 'Error (Color Wheel Fail)'?
If your Optoma Projector displays an 'Error (Color Wheel Fail)' message, it means there may be a problem with the color wheel. Check the color wheel and replace it if it is malfunctioning.
General| Display Technology | DLP |
|---|---|
| Native Resolution | WXGA (1280 x 800) |
| Lamp Life (Normal) | 4000 hours |
| Lamp Life (Eco) | 6000 hours |
| Zoom Type | Manual |
| Zoom Ratio | 1.1x |
| I/O Connectors | HDMI, VGA, USB |
| Projection Size | 30" - 300" |
| Throw Ratio | 1.55-1.7:1 |
