35
WHITE
• Use for lumens and uniformity measurements, banding adjustment and inspection of
dark (stuck OFF) pixels, minor blemishes.
• Confirm there are no more than six total of light and dark blemishes
• Confirm no blemish is greater than five inches in length/diameter.
• Confirm there are no more than four stuck off pixels.
• Verify no banding.
If banding adjustment can’t completely eliminate banding use Banding Referee
image to make final determination.
BANDING REFEREE GRAY 245
• The goal is always to completely eliminate banding. If there still is a very small
amount of residual banding after the best banding adjustment has been made use
the Banding Referee to make final determination of acceptance.
To Next Page
Loading...
