Temperature warning:
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.
Warning! TEMPERATURE TOO HIGH
Fan failed:
Warning! FAN LOCKED
The projector will switch off automatically..
Please contact a service center for repair.
Out of display range:
Out of Range
Calibration failed:
Calibration Fail !
Power down warning:
Power Down Timer Active
Power down in 60 sec
Security timer alarm:
Security Timer Alarm
Time out in 60 sec
To Next Page
Loading...
