Optoma UHD380x User Manual

English
31
USING THE PROJECTOR
Brightness
Adjust the brightness of the image.
Contrast
The contrast controls the degree of di󰀨erence between the lightest and darkest parts of the picture.
Sharpness
Adjust the sharpness of the image.
Color
Adjust a video image from black and white to fully saturated color.
Tint
Adjust the color balance of red and green.
Gamma
Set up gamma curve type. After the initial setup and ne tuning is completed, utilize the Gamma Adjustment steps
to optimize your image output.
 Film: For home theater.
 Video: For video or TV source.
 Graphics: For PC / Photo source.
 Standard(2.2): For standardized setting.
 1.8 / 2.0 / 2.4: For specic PC / Photo source.
Note: These options are only available if the 3D mode function is disabled. In 3D mode, user can only select 3D
for Gamma setting.
Color Settings
Congure the color settings.
 BrilliantColor
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
 Color Temperature: Select a color temperature from D55, D65, D75, D83, D93, or Native.
 Color Gamut: Select an appropriate color gamut from Native, HDTV, Presentation, Cinema, or Game.
 Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
 Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
 Color Matching: Adjust hue, saturation, and gain for the red, green, blue, cyan, yellow, magenta, or
white color.
 RGB Gain/Bias: This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
Signal
Adjust the signal options.
 Frequency: Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
 Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
 H. Position: Adjust the horizontal positioning of the image.
 V. Position: Adjust the vertical positioning of the image.

Optoma UHD380x Specifications

General

Brand	Optoma
Model	UHD380x
Category	Projector
Language	English