English
48
USING THE PROJECTOR
Wireless Media Streaming
Select TapCast to project your mobile device display to the projector through Wi-Fi connection. Then press Enter
on the remote control or on the projector keypad to enter the TapCast screen.
1. When using TapCast function for the rst time, download and install the TapCast application into your
mobile device.
Note: You can scan the QR code shown on the screen.
2. On the projector, insert the Wi-Fi dongle and go to Settings > Network > Wireless Setting (Wi-Fi
Display). Then set the Wi-Fi setting to ON.
3. Connect the projector to an available network. For details, please refer to page 51.
4. On your mobile device, enable the Wi-Fi function. Then connect to the same network as the projector.
IMPORTANT!
The projector and your mobile device must be connected to the same Wi-Fi network.
During the Wi-Fi Display operation, make sure that you have access to the internet.
To Next Page
Loading...
Need help?
General
