36
USING THE PROJECTOR
Remote settings menu
IR Function
Set the IR function setting.
On: Choose “On”, the projector can be operated by the remote control from top and front IR receivers.
Front: Choose “Front”, the projector can be operated by the remote control from the front IR receiver.
Back: Choose “Back”, the projector can be operated by the remote control from the rear IR receiver.
O: Choose “Off”, the projector can’t be operated by the remote control. By selecting “Off”, you will be
able to use the Keypad keys.
User1/ User2/ User3
Assign the default function for User1, User2, or User3 between Test Pattern, CMS, Color Temp, Gamma, Auto
Source, Projection, Lamp Settings, Digital Zoom, MHL, Dynamic Range, or Dynamic Black.
Projector ID menu
ID denition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
12V trigger menu
Use this function to enable or disable the trigger.
Reserved
IR_IN & detect
GND
On: Choose “On” to enable the trigger.
O: Choose “Off” to disable the trigger.
Options menu
Language
Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese,
Simplied Chinese, Japanese, Korean, and Russian.
Menu Settings
Set the menu location on the screen and congure menu timer settings.
Menu Location: Select the menu location on the display screen.
Menu Timer: Set the duration where the OSD menu stays visible on the screen.
Auto Source
Choose this option to let the projector automatically nd an available input source.
Input Source
Select the input source between HDMI1, HDMI2/MHL, and VGA.
High Altitude
When “On” is selected, the fans will spin faster. This feature is useful in high altitude areas where the air is thin.
Display Mode Lock
Choose “On” or “Off” to lock or unlock adjusting display mode settings.
Keypad Lock
To Next Page
Loading...
Need help?
General
Weight and Dimensions
