EasyManuals Logo

Optoma UHD50 User Manual

Optoma UHD50
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #41 background imageLoading...
Page #41 background image
English
41
MAINTENANCE
Installing and cleaning the dust lter
Installing the dust lter
Note: Dust lters are only required/supplied in the selected regions with excessive dust.
Cleaning the dust lter
We recommend you to clean the dust lter every three months. Clean it more often if the projector is used in a
dusty environment.
Procedure:
1. Switch off the power to the projector by pressing the “ ” button on the projector keypad or the “
button on the remote control.
2. Disconnect the power cord.
3. Pull the dust lter compartment downwards to remove it out from the bottom of the projector. 1
4. Carefully remove the air lter. Then clean or replace the dust lter. 2
5. To install the dust lter, reverse the previous steps.
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Optoma UHD50 and is the answer not in the manual?

Optoma UHD50 Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio16:9
Projection distance0.8 - 10.6 m
Vertical scan range24 - 120 Hz
Horizontal scan range31000 - 135000 kHz
Projection technologyDMD
Supported aspect ratios4:3, 16:9
Contrast ratio (typical)500000:1
Screen size compatibility34.1 - 302.4 \
Projector native resolution2160p (3840x2160)
Keystone correction, vertical-40 - 40 °
Lamp power240 W
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)10000 h
FocusManual
Offset100 %
Focal length range20.91 - 32.62 mm
Aperture range (F-F)2.5 - 3.2
Full HDYes
Supported video modes480i, 480p, 720p, 1080i, 1080p, 2160p
Analog signal format system-
Supported graphics resolutions640 x 480 (VGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 1360 x 768 (WXGA), 1366 x 768, 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 1920 x 2160
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Noise level28 dB
Noise level (economic mode)25 dB
Card reader integratedNo
Sustainability certificatesRoHS
RMS rated power10 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Market positioningPresentation
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)348 W
Power consumption (standby)- W
Power consumption (typical)317 W
Power consumption (economy mode)259 W
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)0 - 85 %
Remote control typeIR
Weight and Dimensions IconWeight and Dimensions
Depth129.5 mm
Width391.1 mm
Height281.9 mm
Weight5330 g

Related product manuals