EasyManuals Logo

Optoma UHD51 User Manual

Optoma UHD51
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
English
18
USING THE PROJECTOR
Powering on / off the projector
or
Enter
Enter
Powering on
1. Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will
turn red.
2. Turn on the projector by pressing the “ ” button on the projector keypad or the remote control.
3. A start up screen will display in approximately 10 seconds and the On/Standby LED will be ashing
blue.
The rst time the projector is turned on, you will be prompted to do the initial setup including selecting the preferred
language, projection orientation, and power mode settings. Once the Complete set screen appears, this indicates
the projector is ready to use.
[Select Language] [Select Projection Mode]

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Optoma UHD51 and is the answer not in the manual?

Optoma UHD51 Specifications

General IconGeneral
Native aspect ratio16:9
Projection distance1.2 - 8.1 m
Vertical scan range24 - 120 Hz
Horizontal scan range31 - 135 kHz
Projection technologyDLP
Supported aspect ratios4:3, 16:9
Contrast ratio (dynamic)500000:1
Contrast ratio (typical)-
Screen size compatibility34.1 - 302.4 \
Projector native resolution2160p (3840x2160)
Lamp power240 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)10000 h
Offset105 %
Throw ratio1.21 - 1.59:1
Zoom capabilityYes
Focal length range12.81 - 16.74 mm
Vertical lens shift range-10 - 10 %
DVI portNo
HDMI connector typeFull-size
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in0
Noise level25 dB
On Screen Display (OSD) languagesCHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, POR, RUS
Supported video modes480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2160p
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 768 (WXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 3840 x 2160
PlacementDesktop
Product typeStandard throw projector
Product colorBlack
Market positioningHome cinema
Cable lock slot typeKensington
Cables includedAC
RMS rated power10 W
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)305 W
Power consumption (standby)0.5 W
Operating altitude0 - 3000 m
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 85 %
Weight and Dimensions IconWeight and Dimensions
Depth281 mm
Width392 mm
Height118 mm
Weight5220 g

Related product manuals