optris MS – DE2011-04-A
31
Data Logger [MSPro]
The MSPro has an internal data logger for 20
values.
STORING DATA
Please make your measurement and release
the TRIGGER – the unit is in the HOLD mode.
Pressing the D
OWN button will show the next
free data logger position (flashing) and a disc
icon in the display. With UP and DOWN you can
change the data logger position manually.
Pressing M
ODE will store the data into the logger
(confirmed by a twofold acoustic signal).
R
ECALL OF DATA
Please press the T
RIGGER and MODE
simultaneously. The next free data logger
position and a disc icon (flashing) will be shown
in the display. With U
P and DOWN you can
select any data logger position. To switch
between IR temperature value and t/c probe
value please press the M
ODE button.
RESET OF THE DATA LOGGER
Please press the D
OWN button during the HOLD
mode. Select logger position 0 and press M
ODE
again. A threefold acoustic signal confirms the
successful reset.
To Next Page
Loading...
Need help?
General
