Oransi OVHM80 User Manual

Using Your Oransi
Always operate your air purifier
indoors on a level surface.
Locate your air purifier wherever
you spend most of your time.
Typically, a bedroom, living space,
office waiting room, or classroom.
Set the fan speed to a level that is
comfortable for you. Low settings
are less audible. In most cases, you
can run your air purifier on a very
low fan.
For larger areas, consider a higher
fan speed when you’re absent and
then turn the setting lower when
you return.
Air enters your Oransi at the
bottom and exits the top, so you
can place the unit anywhere in a
room. However, be careful that
curtains do not block air intake or
exit.
Problem: Air Quality indicator constantly shows poor air quality.
Cause: Lens inside the sensor is dirty.
Solution: Turn off and vacuum the sensor (to the right of the power button). Wait a
few seconds and power back on.
Problem: Unit will not turn on.
Cause: Cover is not fully closed, may be blocked by filters. This occurs sometimes in
shipment.
Solution: Remove the front cover and all of the filters. Re-install the filters and ensure
each is fully installed. Reinstall the front cover with the bottom edge first and then
rotate to snap the top two corners in place.
T R O U B L E S H O O T I N G
F O R A S S I S T A N C E
v i s i t w w w . o r a n s i . c o m
c a l l 8 8 8 - 2 8 1 - 3 9 4 8
o r e m a i l c s @ o r a n s i . c o m
13

Oransi OVHM80 Specifications

General

Brand	Oransi
Model	OVHM80
Category	Air Cleaner
Language	English