TECHNICAL MANUAL BLUE PAPER ALMA· HYDRO 202120 | ORBEA ORBEA | 21
EN
Maximum size oval chainring 34T
Minimum chainring size 30T
Minimum oval chainring size 30T
Brake type DISC*
Rear brake caliper standard POST MOUNT
Maximum rear rotor size 160mm
Minimum rear rotor size 160mm
Compatible chainguide NO
ISCG NO
Cabling
Internal in downtube
External on chainstays. Full sleeve
Compatible rear
brake left
YES. Rear brake hose enters
the frame on the left
Bottle holder 2. In all sizes
Transmission c
ompatibility
SHIMANO: 11S and 12S
SRAM: 11S and 12S
Compatible SHIMANO DI2 NO
Compatible SRAM AXS YES
Powermeter compatibility Consult dimensions and compatibility with manufacturer
Trailer compatible NO
Rear rack compatible NO
Fixed mudguard compatible NO
Child seat compatible NO
TECHNICAL
SPECIFICATIONS
Frame material HYDROFORMED ALUMINUM 6061 TRIPLE BUTTED
Recommended use XC, MARATHON
Sizes S/M/L/XL
Fork travel 100mm
Maximum fork travel 100mm
Maximum fork lenght
(axle-to-crown)
510.8mm
Maximum number of headset spacers 30mm
Wheel size 29"
Maximum tyre width (rear) 29x2.40
Fork offset 44mm
Bottom bracket shell width 73mm
Bottom bracket standard THREADED BSA 73mm
Chainline 52mm
Headset 1” 1/8-1” 1/2 INTEGRATED
Rear axle standard BOOST 148 THRU-AXLE
Rear axle measurements 12x168mm
Rear axle thread pitch/lenght 1.5x12mm
Seatpost diameter 27.2mm
Seatpost clamp diameter 31.8mm
Seatpost maximum insertion S (200mm), M (240mm), L (275mm), XL (320mm)
Internal cabling
of dropper seatpost
YES
Front derailleur NO. 1X ONLY
Maximum chainring size 36T
* Not all calipers and rotors in the market are compatible with all frames. All componets specicated from Orbea have been tested.
For aftermarket options, check componentes dimensions and tolerances befores purchasing.
To Next Page
Loading...
Need help?
General
