Orbegozo FDR 70 - Preparation and Parts; Before Plugging In; First Time Use Preparation; Parts List Identification

FDR 70
14
BEFORE PLUGGING IN
• Make sure your electricity supply is the same as the one shown on the underside of the fryer.
Important
• The wires in the cord are coloured as follows:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
BEFORE USING FOR THE FIRST TIME
1. Removing all packaging.
2. Dismantle: see ‘to dismantle, assemble and use your fryer’.
3. Wash the parts: see ‘cleaning’.
PARTS LIST
2 .- Thermostat
3 .- Heat lamp (Red)
4 .- Voltage lamp (Green)
5 .- Lid
6 .- Oil container
7 .- Frying metal basket
8 .- Structure
9 .- Reset button
10 .- Compartment cable
TO DISMANTLE, ASSEMBLE AND USE YOUR FRYER
To dismantle
1. Lift lid off.
2. Remove the basket.
To assemble and use