Orbic Q10 - Connectivity; Wi-Fi, Bluetooth, and USB

56
Getting Connected
The instructions below describe how to connect your device
through Wi-Fi, Bluetooth, and USB cable.
Wi-Fi
Wi-Fi refers to certain types of Wireless Local Area Networks
(WLAN) and Communication via Wi-Fi requires an access point.
Turn Wi-Fi ON
Turning on Wi-Fi will make your device discover and connect to
wireless APs within range.
1. Touch the Home key > swipe up for apps > Settings
>
Network & Internet > Wi-Fi.
2. Tap
to turn Wi-Fi ON or OFF.
3. Once the Wi-Fi is ON, you will see a list of available Wi-Fi
networks.
4. Tap a network to connect. The network you choose will ask
for a password if it is secure.
5. Tap Connect.
Adding a Wi-Fi Network
You can manually add a Wi-Fi network if it does not appear in the
list of available networks.
1. Touch the Home key > swipe up for apps > Settings
>
Network & Internet > Wi-Fi.
2. Make sure the Wi-Fi is ON.
3. Tap Add Network. Enter the network SSID and other re-
quired network information.
4. Tap Save.