8
Assemble Your Device
Prior to use, it is necessary to install the SIM card, memory card
and charge the battery.
Your device uses a nano-SIM card. A SIM card may be preinstalled
or may be able to use your previous SIM card.
Installing an SD Card/SIM Card
To install a SIM card or a micro-SD, power off the device and follow
the below steps –
1. Insert the SIM pin tool into the SIM pinhole on the tray to
open the tray.
2. Insert the microSD card with the gold contacts facing down
and close the tray.
Charging the Battery
Before using your phone, you must fully charge the battery (100%).
Warning! Use only approved charging devices and batteries. Using
other accessories may void your warranty and may damage your
device.
1. Plug the USB cable into the USB power adapter.
2. Plug the power adapter into a standard outlet.
3. Plug the other end of the USB cable into the phone’s micro
USB port.
4. The USB icon on the cable should always face up when
connecting the cable to your device, as shown.
To Next Page
Loading...
