Orbic TAB8 4G - Set Up Your Orbic TAB8 4 G; Turn Your Orbic TAB8 4 G ON;OFF; Initial Setup

9
Turn Your Orbic TAB8 4G ON/OFF
The instructions below explain how to turn your Orbic TAB8 4G ON
or OFF.
To Turn the Orbic TAB8 4G ON
• Press and hold the Power/Lock key until the Orbic TAB8 4G
turns ON.
NOTE: The rst time you use your Orbic TAB8 4G, you’ll need to
set it up.
To Turn the Orbic TAB8 4G OFF
1. If the display is OFF, press the Power/Lock to turn it back on.
2. Press and hold the Power/Lock for a few seconds.
3. When the Orbic TAB8 4G options menu appears, tap Power
OFF.
4. Tap OK.
Initial Setup
The rst time you turn your Orbic TAB8 4G ON (or after a reset to
factory settings), the on-screen prompts guide you through the
basics of setting up your Orbic TAB8 4G.
Follow the prompts to choose a default language, set up accounts,
choose location services, and much more.
Set Up Your Orbic TAB8 4G