Orbit OceanTRx7 - Introduction; 1.1 Purpose; 1.2 Principles; 1.2.1 Torque Table

TEC32-1664-009 OceanTRx7™ ADMx Technical Note Page 1 of 10
1 Introduction
1.1 Purpose
The purpose of this Technical Note is to provide detailed instructions on how to replace and
configure an ADMX.
1.2 Principles
The following principles must be followed when performing the procedures in this Technical
Note.
1.2.1 Torque Table
The following table provides the torque that should be used when tightening screws of the
listed types, as relevant.
Table 1-1: Torque Values
Screw Type
Torque
M8
25
N
/
m
M6
10.2
N
/
m
M5
6
N
/
m
M4
2.5
N
/
m
M3
1.35
N
/
m