MANUAL
Go to preset sub-menu to choose “MANUAL”, then press 、
to search backward or forward, the
searching will stop automatically after finishing search.
CHOOSE CHANNEL
1 .Press number key 1-10 to choose channel 1-10,As to the channels
exceeding 10, press 10+ to choose --,then press number key to input
tens digit, then press number key to input digit.
2. Press CH+ or CH- key to choose next or previous channel or go to
preset sub-menu to choose PROG, then press 、 to choose
previous or next channel.
SWAP
Go to preset sub-menu to choose “SWAP”, press 、 to
change channel. After changing channel number, need to press SEL
to escape from preset sub-menu, SWAP is effective. Swapped
channel will be memorized.
BAND
Go to preset sub-menu to choose BAND, press 、 to change
BAND. This function is often used to BAND selection before
manual.
To Next Page