To Next PageTo Next Page
Need help?Do you have a question about the Orbit ST2-RF and is the answer not in the manual?
General| Brand | Orbit |
|---|---|
| Model | ST2-RF |
| Category | Irrigation System |
| Language | English |
Provides an overview of the Orbit Signature Control timer and its advanced features.
Highlights key functions such as dual programs, six start times per program, and no-watering options.
Describes the nine buttons used for programming and other operations on the timer.
Explains the function of the dial for programming, reviewing, and operating the timer.
Details the switch that controls the rain sensor's monitoring function.
Outlines features like blue text for buttons and glossary for user assistance.
Guides on setting multiple start times for watering programs A and B.
Instructions for setting watering duration for each station in programs A and B.
Explains how to select days of the week, odd/even days, or interval watering.
Details how to set the timer to operate automatically based on programmed settings.
Describes how to set the timer to the OFF position to stop all watering.
Provides steps to cancel programmed watering on specific days of the week.
Explains how to set a period during the day when watering should not occur.
Guides on adjusting watering durations by a percentage for seasonal needs.
Instructions for testing each watering station for one minute.
How to manually water all stations sequentially with set durations.
Guides manual watering for stations assigned to Program A with their set durations.
Guides manual watering for stations assigned to Program B with their set durations.
Instructions for manually watering one specific station for a selected duration.
Explains how to temporarily stop programmed watering for a set period.
Steps for installing a 9-volt battery in the remote control device.
Procedure for synchronizing the remote control with the timer via RF Sync.
Instructions on using the remote to water all stations sequentially.
How to use the remote to water a single selected station.
Guides on selecting multiple stations on the remote for sequential watering.
Explains the function of the optional sensor for preventing watering based on rain or freeze conditions.
Provides a step-by-step guide for mounting the timer and docking port.
Lists the necessary tools for installing the timer and remote control sleeve.
Detailed instructions for securely mounting the timer's docking port to a wall.
Steps for connecting the 24VAC transformer to the docking port sockets.
Guides for wiring electric valves, common wires, and pump start relays.
Detailed instructions for connecting individual valve wires to station sockets.
Explains how to connect wires for pump start relays or master valves.
Instructions for mounting the sleeve for the remote control device.
Explains the timer's fault detection for solenoids, wiring, pump, or master control.
Describes how the timer indicates faults like 'FAULT STN' or 'PUMP FAULT'.
Steps for troubleshooting and correcting detected wiring or solenoid faults.
Details the timer's self-resetting circuit breaker and its causes.
Guidance on creating a watering plan using the timer's dual program capabilities.
