1.2.3 MODE
- Only valid when in the workout page.
- User can switch between INCLINE PROFILE and SPEED PROFILE by pressing MODE button.
1.2.4 QUICK SPEED
Press the speed quick button to quickly adjust speed to 5km/h, 10km/h, or 15km/h when the
treadmill is running.
1.2.5 QUICK INCLINE
Press the incline quick button to quickly adjust incline to level 5, level 10, or level 15 when the
treadmill is running.
1.2.6 SAFETY KEY
If user turns on the console but without inserting the safety key, the console will show
“PLEASE PLACE SAFETY KEY”.
1.3 CONSOLE DISPLAY BUTTON FUNCTION
1.3.1 POWER
If user presses POWER button at IDLE MODE, the console display will be turned off; If user
wants to turn on, please press the POWER button again.
1.3.2 STOP
- Press STOP button once when under the WORK OUT mode, the console display will show
PAUSE. The speed will go back to 0 but the incline level will remain.
- Press STOP button twice when under the PAUSE mode, the program will end. Both speed
and incline will resume back to 0.
1.3.3 START
- When you press the START button, the program will start operating.
- If user presses START at WARM UP mode, it will skip the WARM UP and enter the WORK
OUT directly.
11
To Next Page
Loading...
