1.10 USER PROGRAM
- There are 2 options in USER PROGRAM: User and Guest.
- After login, press CUSTOM button to preset each section of speed and incline, and preset
the time and max speed afterwards.
- The default time is 20 minutes and the default incline is 10 level, if user doesn’t set the
goal for time before starting.
1.11 VISION RUN
- There are many different videos in VISION RUN, each of the video is in 10 minutes.
- Choose one video, and set up the ideal time, distance and calories based on user’s need.
- The default setting if user doesn’t set the goal for time before starting:
Time: 20 min
Distance: 5 M
Calories: 200 Kcal
- Cannot use media, mirror and HDMI function when under vision run program.
- When user achieves the goal time, the program ends and enters to summary mode.
1.12 HRC
There are 3 options in HRC PROGRAM: 60%, 70% and 80%.
1.12.1 Initial Setting
- Target Heart Rate Calculation:
When at 60%, THE: (220-Age)* 60%
When at 70%, THE: (220-Age)* 70%
When at 80%, THE: (220-Age)* 80%
- User can set up the target time and target heart rate.
- The default setting if user doesn’t set the target before starting:
Target Time: 20 min
Target HR: 140 bpm
- When user achieves goal time, the program ends and enters to cool down mode.
1.12.2 Pop-up Window
During exercising, the console may jump out the pop-up window below.
- If actual heart rate > TRH+5, the speed will automatically decrease by 0.5 km/h every 10
21
To Next Page
Loading...
