Orbit StarTrack ST36T - Page 17

TIME
1. Unit: MINUTE:SECOND
2. Display Data Range: 00:00 ~ 99:59
3. Pull-down the button and user could switch to different data
display: ELAPSED TIME, TARGET TIME, REMAINING TIME
4. If user sets up the goal time before start exercising:
- The data presents the remaining time.
- When user achieves the goal time, the exercise ends.
5. If user doesn’t sets up the goal time before start exercising:
- The data presents the elapsed time.
- When the data exceeds 99:59, it will go back to 00:00 and keep
counting.
CALORIES
1. Unit: kcal
2. Display Data Range: 0~9999
3. Pull-down the button and user could switch to different data
display:
- METs (Metabolic Equivalent): no unit
- CALORIES
- CALORIES / HR
- ELEVATION GAIN: unit m/ft
4. When user sets CALORIES as GOAL, the window shows remaining
calories; otherwise, it shows the actual consuming calories.
HEART RATE
1. Unit: BPM
2. Display Data Range: 40~220
3. Setting Data Range: 40~200
4. Pull-
down the button and you could switch to different data display:
CURRENT HR, AVG HR, MAX HR.
PACE
1. Unit: MIN / KM
2. Display Data Range: 2:30~120:00
INCLINE
1. Unit: level
2. Display Data Range: 0 ~15 level
16