ORBITEC OSW Series - Page 13

Operation Manual
"Open Frame Welding Head OSW Series"
13
6
Sideways adjustment to the centre of the tube via the knurled
screw on the torch arm.
7
Adjustment of the torch head angle to the tube axis with a hex-
agon key
8
Adjustment of the arc distance via the torch height adjustment
with the hexagon key.
Guide values
Wall thickness / electrode separation
0.5 mm - 1.0 mm
0.8 mm
1.25 mm - 2.0 mm
1.3 mm
2.25 mm - 3.9 mm
1.8 mm
with cold wire feed
2.5 mm - 3.5 mm
9
The hose package is coiled automatically via the welding pro-
gram in the control unit. CAUTION: pay attention to the rout-
ing of the hose package.