Need help?Do you have a question about the Orbitsound M10LX and is the answer not in the manual?
Power| amplifier power | 250 W total |
|---|---|
| power consumption - standby | 0.4 W |
| power consumption - idle | 4 W |
Audio Specifications| frequency range +/- 3 dB | 38 – 16 KHz |
|---|---|
| maximum SPL | 97 dBA |
| crossover frequencies | 190/5, 000 Hz |
Weight and Dimensions| dimensions (H x W x D) - soundbar | 90 x 500 x 95 mm |
|---|---|
| dimensions (H x W x D) - subwoofer | 130 x 230 x 340 mm |
| weight in packaging | 10.4 kg |
Provides contact details for Orbitsound support and international inquiries via phone and email.
Lists all items included in the packaging for the Orbitsound M10LX soundbar.
Step-by-step instructions for connecting the subwoofer, power supply, and turning on the soundbar.
Explains how to position the soundbar to maximize the spatial stereo sound field effect.
Offers advice on placing the subwoofer for optimal bass performance without affecting overall sound.
Explains the low power state feature for energy conservation when the soundbar is in standby.
Details how the soundbar retains settings like pairing, bass, treble, and volume when powered off or in standby.
Instructions on how to reset soundbar settings to factory defaults using the power button.
Instructions on how to properly clean the soundbar's exterior using a soft cloth and mild cleaning agents.
Steps to diagnose and resolve issues where no audio output is produced by the soundbar.
Advice on correcting audio delay or sync problems between the soundbar and television.
Troubleshooting steps for when the soundbar's remote control fails to operate.
Solutions for distorted audio output, including checking connections and volume levels.
Tips for reducing unwanted noise or hiss from the soundbar's audio output.
Addresses problems like clicking sounds or no audio with digital optical connections.
Steps to troubleshoot when the subwoofer is not producing sound while the soundbar is working.
Instructions for replacing the battery in the remote control, including battery type recommendations.
Defines terms like 'Agent', 'Purchaser', and 'Product' as used in the warranty agreement.
Outlines the procedure for initiating a warranty claim for a faulty unit.
Instructions on how to dispose of the product responsibly according to EU regulations for recycling.
Details compliance with FCC rules for digital devices and potential radio frequency interference.
To Next Page
