12
Auto-mute
If there is no signal, or extremely low input signal, the soundbar will enter auto-
mute mode. This reduces power consumption, and also completely silences the
soundbar and subwoofer.
Bluetooth resume / grab
If you have previously paired your phone/tablet, there is no need to re-pair the
device. Simply choose the Bluetooth source, then short press the Bluetooth
button on the control panel. The soundbar will seek a previously paired device,
and resume playback.
Note: You can also press play/pause on the remote control in Bluetooth mode to
‘grab’ your paired device and continue playback.
Important safety information
1 - The apparatus shall not be exposed to dripping or splashing and that objects
filled with liquids, such as vases, coee mugs, glasses etc. shall not be placed on
apparatus.
2 - The mains plug/appliance coupler/direct plug-in adapter is used as
disconnect device for the soundbar and the subwoofer, the disconnect device
shall remain readily operable.
CAUTION: Danger of remote control failure if battery is incorrectly replaced.
Replace only with CR2025 or CR2032 (preferred).
WARNING: The remote control battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
To Next Page
Loading...
