Orcon MVS-15RH - Technical Data

Table 6 List of error codes on device
Device indication red: Function (notication)
Flashing red 1x Motor not running,
check the motor
Flashing red 2x No value from humidity
sensor, check the humidity
sensor
Flashing red 3x RF communication failure
Table 5 List of scenarios shown on device
Device indication green:
Function (notication)
Flashing green 1x
Normal operation, no hu-
midity, CO
2
or timer signal.
Flashing green 2x
Humidity scenario active
Flashing green 3x
CO
2
scenario active (Exter-
nal CO
2
room sensor).
Flashing green 4x
Timer scenario active
7. Technical data
MVS-15RH
Supply voltage: 200-240 V single phase 50 Hz
Current consumption 0.8 A
Max. power consumption
consumption
85 W
Min. ambient temperature -10 °C
Max. ambient
temperature
+40 °C
Humidity
(continual)
95% (motor) non-condensing
85% (electronics),
non-condensing
Weight 4.4 Kg
Height 389 mm
Width 449 mm
Depth 303 mm
Height with connections 467 mm
15