Orcon MVS-15RH - User Manual

This manual is intended for users and installers of the MVS-15RH mechanical ventilation system. This manual contains
important information about the installation and conguration of the domestic ventilator.
The user manual can be found at the back of this manual.
This manual concerns the following models:
MVS-15RH, MVS-15RHB, MVS-15RHP, MVS-15RHB CO
2
Installation manual
MVS-15RH Domestic ventilation

Summary

Installation Manual

Safety

General Safety Guidelines

Key safety rules and precautions for installation and operation.

Warning Icons and Descriptions

Explains the meaning of warning icons used in the manual.

Installing the MVS-15 RH Domestic Ventilator

Installation Steps

Step-by-step guide for installing the ventilation device.

Rear Connections

Mounting the RF Remote Control

Electrical Installation

Adjustment of Air Volume

Air Volume Adjustment Procedure

Steps to set and adjust the air volume for optimal ventilation.

Configuration and Pairing

Device Start-up and Humidity Sensor Configuration

Initial device start-up sequence and humidity sensor settings.

DIP Switch 8 Functionality

Explains the function of DIP switch 8 for overrun settings.

Resetting the Remote Control

Setting Up the CO2 Room Sensor

Pairing Additional CO2 Room Sensors

Service and Maintenance

Unpairing Remote Controls and CO2 Sensors

Steps to disconnect paired remote controls and sensors from the device.

Resetting the CO2 Room Sensor

Procedure to reset the CO2 room sensor to factory default.

Removing and Installing the Front Cover

Removing and Installing the Motor Plate

Humidity Sensor Maintenance

Removing and Installing the Volute

Indication LED on the Device

Technical Data

Guarantee

EC Declaration of Conformity

Installers Installation Report

Orcon MVS-15RH Specifications

General

Brand	Orcon
Model	MVS-15RH
Category	Fan
Language	English