EasyManuals Logo

OREC HRC663 User Manual

OREC HRC663
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
SAFETY RULES
CAUTION
Some of the illustrations show the machine with no guard, no shield. Never use the machine
without these devices.
Learn to stop the machine in case emergency.
Read this manual.
Do not let anybody use the machine before having read and understood this
manual.
Do not let children use the machine.
Do not wear loose clothes. They might be grasped by moving parts.
Always wear protection equipment when using the machine.
Only work during daylight or with good artificial light.
Check that the safety instruction stickers are in place and in a good condition.
Keep the machine free from debris or mud.
Check that the machine can work properly before any use.
Check that all the shields, grids and safety guards are in place and in a good state.
It is strictly forbidden to carry persons or animals onto the machine during the work or during the
transportation.
Never stop or start roughly when working on a slope. Never use the machine to work on a stepping
terrain.
Reduce the ground speed when running on a slope and when turning
straight in order to prevent from any risk of losing control.
Be very careful when bordering ditches.
Stop the engine, and remove the sparking plug ignition cover before any
intervention on the machine.
Never work under the machine or its parts when lifted, unless they are
blocked and maintained into position with sufficient security.
When running on a slope, basically work going up or down. In case of
going across the slope, respect the limit angle on slope.
Steer clear of unsteady embankments, holes or rocks. They might be dangerous during manoeuvres
or transport.
Keep away from electric wires and obstacles. A contact with electric wires causes electrocution and
death.
Stop the engine when lifting or transporting the machine.
When stopping the work, stop the engine and remove the sparking plug ignition cover before leaving
the mower.
Engage all the safety equipment.
Move the controls only when correctly sat down in the mower
Visually check hydraulic leaks and if some parts are faulty or missing. Repair before use.
Never change the adjustment of the regulator, it is set in the factory. Unsetting this valve would
cause failures.
Ensure that the user of the machine has already read and understood this
manual and is aware of all the safety instructions before any use.
Always use a chuck and bronze hammer when replacing or intervening
on the pins and bolts at the end of rams, rod … etc. in order to avoid the
projection of metal fragments.
Clear the mowing path from foreign objects, stones, woods, cans, bottle,
pieces of steel, which can be thrown by the mower.
Gasoline is highly flammable :
- Refuel outside, never smoke when refueling
- Never refuel when the engine is running, stop the engine before refueling
- Allowed the engine to cool down before refueling
- If gasoline has spilled, do not try to start engine before the spilled gasoline has been wiped.
- Check that the fuel cap is correctly installed after refueling

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the OREC HRC663 and is the answer not in the manual?

OREC HRC663 Specifications

General IconGeneral
BrandOREC
ModelHRC663
CategoryLawn Mower
LanguageEnglish

Related product manuals