To Next PageTo Next Page
Need help?Do you have a question about the OREC HRC663 and is the answer not in the manual?
General guidance on using the manual for optimal mower operation.
Explains hazard indicator symbols like DANGER, WARNING, and CAUTION.
Procedures for dealer responsibilities and checks during customer handover.
Essential rules for safe operation, including guards and protective gear.
Warnings for slopes, fuel handling, and other specific operational hazards.
Controls machine movement engagement.
Engages the cutting blade.
Selects forward, reverse, and neutral speeds.
Adjusts engine speed.
Controls machine steering direction.
Modifies handlebar position.
Aids in cold engine starting.
Manages fuel supply to the engine.
Sets the cutting height.
Powers the engine on and off.
Secures crawlers on specific models.
Step-by-step procedure to start the engine.
Guidelines and safety for operating on inclines.
Steps for effective grass cutting.
Proper procedure to halt operation.
Instructions for safe storage and moving the machine.
Routine checks before operation and fuel system inspection.
Procedures for air filter cleaning and engine oil checks/changes.
Inspection of cutting blades for wear or damage.
Specifies torque values for fasteners.
Guide to greasing and oiling points on the machine.
Adjusting various control cables for proper function.
Procedures for adjusting drive and transmission belts.
Verifying the blade stopping mechanism.
Procedure to adjust crawler track tension.
Manufacturer's compliance statement with directives.
Presents vibration data for different models.
General| Brand | OREC |
|---|---|
| Model | HRC663 |
| Category | Lawn Mower |
| Language | English |
