OREC RM83G - Ec Conformity Declaration; Measurement of Vibrations

OREC RM83G - © SAT 03/2015
24
EC CONFORMITY DECLARATION
Business name and full address of the manufacturer: OREC CO LTD
548-22 HIYOSHI HIROKAWA-MACHI
YAME-GUN FUKUOKA JAPAN
S.A.T. sarl - Force 7 – ZA –
38110 ROCHETOIRIN
France owner of the technical documents
Designation : ride on brush cutter
Mark : OREC
Type : RM830
Serial Identification :
Engine :
- Manufacturer : Honda
- type : GXV390
- Power : 7,6kW
Width of cut : 820 mm
Conforms to directives: 2000/14/EC, 2006/42/EC, 2014/30/EU
Conformity assesment : 2006/42/EC Annex VIII
Measured acoustic power level : 100,7 dB(A)
Granted acoustic power level : 101 dB(A)
Conformity assesment : 2000/14/EC Annex V
Notified body n°0088: Lloyd’s Register Quality Assurance
71 Fenchurch street London EC3S 4BS UK
Acoustic pressure level at operator’s ears : 89,8 dB(A)
Harmonized standards used : EN 12733:2018, EN ISO 14982-2009,
EN ISO 3744-2010, EN ISO 3746-2010,
EN1032-2003+A1-2008, EN ISO 20643:2008+A1:2012
made at : Fukuoka, 24 August 2020
Signed : Haruhiko Imamura
Function : Managing director
MEASUREMENT OF VIBRATIONS
Mark : OREC
Engine : Honda GXV390
Type : RM830
Pick up location
Awp
Right side 60° from the axle of the steering wheel
3,75 m/s²
Left 60° from the axle of the steering wheel
3,54 m/s²
On the operator's seat
1,69 m/s²