5
Operate
1. Check the air purier for the lters.
Be sure the supplied lters are properly
in place and all plastic is removed
before turning the unit on.
2. Place the air purier on a hard
surface such as the oor, a table
or desk. Be sure the grilles
are not blocked by other
objects, and there are no
candles or ames near the unit.
The air purier can be placed in a
horizontal or vertical position.
3. Plug in into nearest standard
electrical outlet that accepts a polarized plug.
4. Lightly Press the power button to turn the air purier on.
Press the power button again to turn the air purier off.
5. Select the fan speed. To select the speed, lightly press
and release the fan speed button until the desired speed is
reached.
L = low, Silence Technology
®
, M = medium or H = high.
6. Adjust the timer feature. The time can be selected from
two, four or eight hours. The unit will turn off once it runs
for the selected hours.
Note: The unit will run continuously if all the timer lights
are off.
7. The Check Filter Lights will light up when the lters may
need to be replaced. Press and hold the button for several
seconds until the lter indicator shuts off.
8. Choose to turn the Air Revitalizer feature on or off. Due to
the sensitivity of the smart panel, a slight delay may occur
for the electronics to respond.
IMPORTANT: This unit is equipped with a smart panel that
senses your touch. Heavy pushing is not recommended.
3
4
2
5
8
67
horizontal position
vertical
position
To Next Page
Loading...
Need help?
General
