16
PROBLEM CHECK SOLUTION
ODOR ABSORBER
LIGHT ON UNIT HAS
TURNED RED.
ODOR ABSORBER • REPLACE ODOR ABSORBER IF DESIRED.
• IF ODOR ABSORBER IS NOT REPLACED, REMOVE
OLD ODOR ABSORBER TO TURN OFF CHECK ODOR
ABSORBER LIGHT.
DOES NOT
REMOVE ODOR.
ODOR ABSORBER • VACUUM ODOR ABSORBER WITH A SOFT BRUSH
ATTACHMENT IF DIRTY. DO NOT USE ANY LIQUIDS
TO CLEAN THE ODOR ABSORBER.
• REPLACE ODOR ABSORBER IF DESIRED.
UNIT STILL DOES
NOT OPERATE
PROPERLY.
CHECK ALL THE
ABOVE POINTS
CONTACT ORECK FOR SERVICE.
TO REDUCE THE RISK OF ELECTRIC SHOCK— UNPLUG BEFORE CLEANING OR SERVICING. IF
APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR
DROPPED INTO WATER, TAKE IT TO A SERVICE CENTER PRIOR TO CONTINUING USE.
WARNING!
To Next Page
Loading...
