14
Install New Bag
• Slide the bag collar rmly into bag dock.
Complete the Installation
• Push rear edge of bag into the bag cavity. Make sure it
is all the way down in the bag cavity (C).
• Close bag lid.
NOTE: The canister bag lid will not close without a
lter bag in place.
MOTOR AND EXHAUST FILTERS
Removing and Cleaning the Motor Filter
• The motor lter is located behind the grill in the bag
compartment. It protects the motor from dirt particles. If
the lter become dirty, pull off grill and lift out lter.
ALWAYS DISCONNECT
VACUUM FROM
ELECTRICAL OUTLET
BEFORE STARTING
THIS PROCEDURE!
Maintenance
- continued
To Next Page
Loading...
