Oreck SPEED SWEEP TEK 100 User Manual

Troubleshooting
Problem
The unit does not work
or turn on.
Roller brush is not
working
The indicator lamp
(red) does not work
when charging
Cause
1. The battery has been
inserted incorrectly
2. The battery has not
been charged
1. Roller brush has
debris wrapped
around it.
1. The power cord is not
plugged in.
2. The battery has not
been securely inserted
into the charger.
Areas to check
1. Insert the battery
2. Charge the battery
1. Remove the roller
brush and thoroughly
clean, then reinsert
back into the unit.
1. Be sure the power
cord is plugged into
the electrical outlet
2. Secure the battery is
correctly inserted into
the charger.
10

Oreck SPEED SWEEP TEK 100 Specifications

General

Brand	Oreck
Model	SPEED SWEEP TEK 100
Category	Vacuum Cleaner
Language	English