EN
IMPORTANT Ensure that the wind sensor is pointing
TEMPERATURE / HUMIDITY SENSOR
150cm(5ft)
TIP
location on the exterior of the home at a height of not
Secure the sensor in the desired location using the wall
RAIN GAUGE
The base station and rain gauge should be positioned
trees or other obstructions to allow rain to fall naturally
To ensure a level plane:
Put a few drops of water on the cross at the base of the
1
23
4
NOTE
TIP Press RESET button on base station to erase all
CLOCK RECEPTION
clock automatically once it is brought within range of a
radio signal:
WMR86:
WMR86A:
EUUK switch to the appropriate
RESET
The reception icon will blink when it is searching for a
ICON MEANING
strong
is weak
P/N: 300102839-00004-10 REV1
7/91