EN
NOTE The unit of all temperature related displays will be
To view temperature (Current / Min / Max temperature)
readings:
SELECT
/
MAX / MIN
To view humidity (Humidity, Dew point) readings:
SELECT
/
MODE repeatedly to toggle between the
MAX / MIN
The timestamp is displayed accordingly in the Clock
To clear the memories and timestamp for the
temperature, humidity and dew point readings:
MAX
/ MIN
NOTE
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
RISING STEADY FALLING
WIND CHILL / DIRECTION / SPEED
The base station
and wind direction
To read the wind
compass point the
is pointing to
The timestamp records the date and time when storing
To select the wind speed unit:
Press UNIT to switch between:
xper second (m / s
xkph
xmph
xknots
The wind level is shown by a series of icons:
ICON LEVEL DESCRIPTION
To view the maximum wind speed and minimum wind
chill readings:
SELECT
will show next to the
MAX / MIN
The timestamp is displayed accordingly in the Clock
To clear minimum wind chill reading / maximum wind
speed reading:
SELECT
will show next to the
MAX / MIN repeatedly until minimum wind
chill reading or maximum wind speed reading is
MAX / MIN
NOTE The wind chill factor is based on the combined
UVI / BAROMETER / RAINFALL
hours of rainfall and barometric
UVI BAROMETER RAINFALL
The bar chart display shows the current and historical
NOTE
indicates how long ago each measurement was taken
P/N: 300102839-00004-10 REV1
9/91
To Next Page
Loading...
