The Clock-Display mode is the unit’s default display
mode. When in another display mode it will automatically
return to the Clock-Display after 9 seconds.
Setting the clock and calendar is sequential. Any part
of the setting sequence can be bypassed by pressing
. Once changes are made and the setting mode
has been exited, the day-of-the-week will automatically
be determined. Days of the week are viewable in 3
languages: English, French and Spanish.
HOW TO SET THE TIME AND DATE
You can choose between 12 / 24-hour clock or month /
day, day / month display format.
At any stage of the setting sequence, if no entry
is made after 9 seconds, the unit will automatically exit the
Clock-Setting mode and return to the Clock-Display
1. In Clock-Display mode, press and hold
2. Select either the 12 / 24-hour format. Press
to switch between the 2 formats.
3. Make selection then press
advance to the next step.
4. To enter the hour digits, press
digits have been selected.
Pressing and holding or will advance digits
in rapid sequence.
5. When the hour has been selected, press
save and to advance to the minute setting mode.
to make the minutes selection.
to save the minutes selection and
advance to setting the day-of-the-week language.
to make the language selection in
English, French or Spanish.
7. When the weekday language has been selected,
to save and advance to setting the
to save the selected year and advance
to setting the month. Press
9. When the month has been selected, press
save and to advance to select the day of the month.
to select the day of the month.
When the day of the month has been selected,
to save and to advance to select the
display option of day-month (D/M) format or month-
WR113_EN_M REV10.indd 13 3/30/07 10:15:22 AM
To Next Page
Loading...
