EasyManua.ls Logo

Oregon Scientific WR113 - About Radio Channels

Oregon Scientific WR113
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
9
locations, the frequency of the transmitter, the strength of
the signal in WATTS, and any remarks as applicable
.
Example of the rst 10 county radio channels and
SAME
codes for Montana:
NOTE
Many counties have been subdivided into as many
as 9 smaller subsections. The numbers 1 to 9 in the far left
column of the SAME code identifi es specifi c subsections
of a county. If a county has not been subdivided, the rst
digit of the county code will be zero.
ABOUT RADIO CHANNELS
The NWR radio channels work in the same way as
a regular radio channel. All of the NWR transmission
stations operate on 1 of 7 frequencies.
The
WR113
labels each frequency as a channel
(1-7)
.
Once the radio frequency for a region has been selected,
the WR113 will receive voice and code information from
that station. The radio channel information is located on
the upper left hand corner of the LCD.
To change to radio channel:
1. In any of the time displays, press and hold
CHANNEL
for 2 seconds.
2. Press
or
to switch between various channels.
3. When the appropriate channel has been selected,
press
MODE
to confi rm and return to the Clock-
Display mode.
1
2
3
4
5
6
7
Channel Corresponding Radio Frequency
162.400 MHz
162.425 MHz
162.450 MHz
162.475 MHz
162.500 MHz
162.525 MHz
162.550 MHz
WR113_EN_M REV10.indd 9 3/30/07 10:15:17 AM

Other manuals for Oregon Scientific WR113

Related product manuals