14
Setup
The CycleAnalyst® will arrive completely set up if it was factory-installed. If the
CycleAnalyst was user-installed, refer to the CycleAnalyst User Installation Manual for
setup instructions.
Handling the ELF
Turning
Make gentle arcing turns at low speed. Avoid making sharp turns at speed. Failure to
follow these guidelines may result in a dangerous loss of control. Take the time to
familiarize yourself with how the ELF handles and turns in a controlled environment before
joining traffic.
The ELF has a large turning radius. Make sure to plan accordingly when riding as it
may be difficult to get out of tight spaces.
Always use the turn signals when making turns. Make sure to return the turn signal
switch to the middle (off) position once you have completed the turn as the signal will stay
on until you change it.
Always ride at appropriate speeds for the road conditions. Increased speed can
increase risk — exercise good judgment to stay safe.
Reversing
The ELF does not have a reverse gear. To reverse, make sure the vehicle has come to
a complete stop and place your feet on the ground. Then simply push the vehicle
backward using your feet (like The Flintstones).
To Next Page
Loading...