Oricom secure55 User Manual

10
Switching On/Off
Switch the baby unit on
Press and hold the power button on the baby unit for
3seconds.Thegreenlinkindicatorwillflashuntilit
links with the parent unit. Once linked, the green link
indicator will remain on.
Switch the parent unit on
Press and hold the power button on the parent unit
for 3 seconds. The green link indicator will flash.
Once the units are linked the green link indicators
ontheparentandbabyunitswillstopflashingand
remain a steady green. The units are now ready to
use.
Switch the baby unit off
Press and hold the power button on the baby unit for
3 seconds. The green link indicator will switch off.
Switch the parent unit off
Press and hold the power button on the parent unit
for 3 seconds. The green link indicator will switch off.
Adjusting the Volume
To adjust the volume, press the volume up (+) or
volume down (-) buttons on the parent or baby unit.
There are 10 sound levels. Each sound level is
signalled by a beep. When maximum or minimum
volume has been reached, the unit will beep 3 times.
Baby Sound Level LED Indicators
The three LEDs on the left of the parent unit indicate
the level of sound being received by the baby unit.
The LEDs light up progressively as the sound
increases.
USING yOUr DIGITAL BABy mONITOr

Oricom secure55 Specifications

General

Brand	Oricom
Model	secure55
Category	Baby Monitor
Language	English